R&D CENTER

Glorystar Laser’s R&D center in Dongguan is staffed by more than 60 highly skilled and experienced employees which are divided into machinery development, electrical technology, optics, software, testing, and other departments. Each department is directed by a technical leader with at least 10 years of experience in related industries. Another R&D advantage is our comprehensive strategic partnership with European laser brand European manufacture. More than 50 laser experts form Glorystar Laser and Promotec co-organized a joint R&D center to work together in the creation of high-end quality laser processing products, offering greater value for our clients.

QUALITY CONTROL

Supplier

1.In order to produce high quality laser cutting machine, we have long-term strategic cooperation with IPG, ESA, Beckhoff, Donaldson, Gudel, Neugart and other well-known manufacturers in the world.
2.IPG is the first laser manufacturer in the world. The laser emitter produced by IPG has stable product quality and low cost. The use of IPG laser transmitters ensures that Glorystar produces high-quality laser systems.

IPG
3.ESA and BECKHOFF are the world’s leading manufacturers of Servo Motors, using a stable servo motor to ensure the accuracy of laser cuttingmachine.
BECKHOFF

4. NEWGUART is a professional reducer manufacturer, with GUDEL guide rail perfect match Ensuring operational stability .

Only good parts can’t guarantee the quality of products. All our equipment is assembled by workers with more than 10 years’ work experience.After the assembly, 21 tests are required to ensure that each product delivered to the customer is a product that gives the customer peace of mind.

(1) Laser interferometer testing: testing the accuracy of machine tools, ensuring that the error is controlled at ±0.02mm – ±0.05mm

Laser-interferometer-testing
Laser-interferometer-testing-2

(2) Reducer run out detection: ensure the running accuracy of the reducer gear, the control error is within 0.03mm

CHECK1
(3) ESA and BECKHOFF are the world’s leading manufacturers of Servo Motors, using a stable servo motor to ensure the accuracy of laser cuttingmachine.

(4) Verticality detection: Verify the verticality of the Z-axis and the X-axis and Y-axis. The accuracy is controlled within 0.02mm to ensure the running accuracy and cutting accuracy of the equipment.

CHECK2

Test Device Introduction

CHECK3

Mitutoyo DIAL GAGESk

Test the accuracy of small machine parts.

accuracy: 0.001mm

CHECK4

Calipers

Test the accuracy of small machine parts

accuracy 0.02mm

CHECK5

Combined diagram level

Test the flatness of running guide rail

railaccuracy 0.01mm

CHECK6

Level Meter:

Accuracy: 0.02mm/m

CHECK7

Calipers

Test the accuracy of small machine parts

accuracy 0.02mm

Micrometer: Test the depth of parallelism between gear rack and guide rail , accuracy 0.03mm

Gantry Structure Test

CHECK9

Depth of parallelism test

Gradienter:  Test the depth of parallelism and straightness. Control the X axis accuracy within 0.01mm, Y axis within 0.03mm.

Gradienter Accuracy: 0.02mm/m.

quality

Guide rail straightness test

Collimator: Test the straightness of guide rail on broadside, accuracy 0.03mm

Pinion & Guide rail test

Micrometer: Test the depth of parallelism between gear rack and guide rail, accuracy 0.03mm.

Laser Source Test

How to test IPG laser source and laser beam?

Use Microscope to check the head of laser source . We also have the laser power meter to test the power of laser source and laser beam.

Laser-Source-Test3

FREE QUOTE

 Fill out this form to get in touch.

Address

Dongguan Shenzhen Suzhou

Tel

+86-769-2168-2791

Address

Dongguan Shenzhen Suzhou

Tel

+86-769-2168-2791